Steam regulating valves are pressure-reducing
diaphragm valves that with primary steam pressure can reduce secondary pressure through air pressure supplied by a control air port.
In tire-curing presses they are used where shaping
pressure is generated by steam, and because our
regulating valves are constructed with a soft seal
using special resin in the valve seat, very fine pressure control is possible. Furthermore, primary steam emerges through the center seat orifice as secondary and enables accurate pressure reduction and the prevention of chattering
from the expansion of large bodies of gas such as steam.
Fluid | Steam |
---|---|
Maximum Inlet Pressure | 1.3 MPa |
Constant Loading Pressure Port Control Pressure Port |
Rc1/4, NPT1/4, G1/4 |
End Connection | Thread (Rc, NPT) |
Flange (JIS 20K RF, ASME Class 300, DIN PN40) |
End Connection | |||
Thread | Flange | ||
Material of Body | Stainless Steel Casting (SCS13) |
SR2211-□□ |
SR2212-□□ |
Ductile Iron (FCD450) |
SR3211-□□ |
Symbol | Meaning of Symbol | Meaning of number and alphabetical character |
Remarks | |
---|---|---|---|---|
N1 | Material of Body | 2 | Stainless Steeel (SCS13) | |
3 | Ductile Iro (FCD450) | |||
N2 | Number of Ports | 2 | 2-Ports (2-way) | |
N3 | Function | 1 | Air to Open | Closed when pilot air is OFF |
N4 | End Connection | 1 | Thread | |
2 | Flange | |||
N5 | Nominal Size | 08 | DN8, NPS1/4 | |
10 | DN10, NPS3/8 | |||
15 | DN15, NPS1/2 | |||
20 | DN20, NPS3/4 | |||
N6 | End Connection Flange Type |
Nil | Indicates flange for body port. Leave blank where no flange is used. |
|
J | JIS 20K RF | |||
A | ASME Class 300 | |||
D | DIN PN40 | |||
N7 | End Connection & Pilot Port Thread Type |
P | Rc | Indicates thread for pilot air port and body port. However, with G type, this indicates the thread for the pilot air port, with the body being Rc. |
N | NPT | |||
B | G, Rc | |||
N8 | Material of Flange | Nil | Material of Flange: S25C | Flange material is S25C |
Y | Material of Flange: SUS304 | Flange material is SUS304 | ||
N9 | Special Options | Y | Material of Flange : SUS | Flange material is SUS304. (Standard: S25C) |
Z□□ | Other Special Options | Indicates fixed number (Z01~) corresponding to each special option. |